Product Name: 1-Allyl-3-Vinylimidazolium Dicyanamide
Synonyms: 1-Allyl-3-vinylimidazolium dicyanamide ionic liquid
CAS Number: 945754-19-0
Recommended Use: Research, chemical synthesis, advanced materials development
Manufacturer: Data available from supplier
Contact Information: Supplier details needed for emergencies
Emergency Telephone: Local emergency telephone numbers or institutional point of contact
Classification: Used in controlled laboratory settings; not assessed for all potential hazards in consumer settings
GHS Symbols: Exclamation mark, environment hazard may be applicable
Signal Word: Warning
Hazard Statements: Harmful if swallowed or inhaled; may cause skin and eye irritation; risk of toxic impact for aquatic life
Precautionary Statements: Avoid contact with skin, eyes, and clothing; do not breathe vapors; wash hands thoroughly
Other Hazards: No data for long-term effects and chronic exposure
Chemical Identity: 1-Allyl-3-Vinylimidazolium Dicyanamide
Molecular Formula: C10H11N5
Molecular Weight: 201.23 g/mol
Purity: Purity often exceeds 95% for laboratory use
Impurities: Trace organics, water, not specifically documented
General Advice: Move patient to fresh air; obtain medical attention immediately
Eyes: Rinse cautiously with water for several minutes; remove contact lenses if present; immediate medical consultation recommended
Skin: Flush skin with plenty of water for at least 15 minutes; remove contaminated clothing
Inhalation: Move person to fresh air; keep comfortable for breathing
Ingestion: Rinse mouth; do not induce vomiting unless instructed by medical personnel
Most Important Symptoms: Eye and skin irritation, respiratory discomfort, possible gastrointestinal upset
Suitable Extinguishing Media: Dry chemical, CO2, foam, water spray
Unsuitable Media: Strong water jets may spread chemical
Specific Hazards: Carbon oxides, nitrogen oxides, hydrogen cyanide possible in combustion
Protective Equipment: Firefighters require full protective gear and self-contained breathing apparatus
Explosion Data: Not reported as explosive, though care advised near heat/flame
Advice for Firefighters: Prevent runoff, cool containers exposed to fire with water
Personal Precautions: Evacuate unnecessary personnel; use protective equipment
Protective Equipment: Chemical splash goggles, laboratory gloves, protective clothing, suitable respirator
Environmental Precautions: Keep out of drains and waterways; contain spills with inert material
Methods for Containment: Absorb spill with inert absorbent, collect in chemical waste container
Methods for Cleanup: Ventilate area, dispose in compliance with local regulations
Precautions for Safe Handling: Minimize exposure; avoid ingestion and inhalation; handle under fume hood or well-ventilated space; only trained personnel should handle; proper labeling on all containers
Conditions for Safe Storage: Store in original tightly closed containers in a cool, dry, ventilated area away from incompatible materials
Incompatibilities: Strong oxidizing agents, acids, bases, heat sources
Special Considerations: Seal and clearly label containers between uses; monitor storage area for leaks and corrosion
Occupational Exposure Limits: Not established for this compound
Engineering Controls: Local exhaust ventilation, safety shower, eyewash stations
Personal Protective Equipment: Resilient lab gloves (nitrile), chemical splash goggles, long-sleeved lab jacket, suitable mask or respirator for airborne exposure
Hygiene Measures: Wash hands thoroughly before breaks/after work, avoid eat/drink/smoke in work area
Environmental Controls: Prevent chemical release into environment or sewer
Appearance: Pale yellow to amber liquid or crystalline solid, depending on purity and temperature
Odor: Slight chemical odor
pH: Not determined in aqueous solution
Melting Point: 30–60°C (varies by sample)
Boiling Point: Decomposes before boiling
Flash Point: Not specified; considered to have low volatility
Solubility: Soluble in water and common polar solvents
Density: Approximately 1.1–1.2 g/cm3
Vapor Pressure: Negligible
Partition Coefficient (log Pow): Not documented
Decomposition Temperature: Above 200°C with possible gas evolution
Chemical Stability: Stable under standard conditions in sealed containers
Reactivity: No rapid or dangerous reactions reported under ordinary handling
Conditions to Avoid: Excessive heat, open flame, contact with strong acids or bases
Incompatible Materials: Strong oxidizers, acids, bases can trigger dangerous reactivity
Hazardous Decomposition Products: Carbon oxides, nitrogen oxides, hydrogen cyanide under fire
Polymerization: Strongly not likely under typical lab conditions
Acute Toxicity: Data limited for this specific compound, but similar dicyanamide salts cause irritant effects
Routes of Exposure: Inhalation, dermal, oral
Symptoms: Eye and skin irritation, gastrointestinal upset, respiratory tract discomfort
Chronic Effects: Long-term exposure not well studied; caution warranted
Carcinogenicity: No classification available
Mutagenicity: Not tested, but related imidazolium compounds can disrupt biological functions
Reproductive Toxicity: Not established
Medical Conditions Aggravated: Existing respiratory, skin, or eye conditions
Ecotoxicity: Possible toxicity for aquatic life; similar ionic liquids have been shown to stress microorganisms and invertebrates
Persistence and Degradability: May not degrade rapidly in the environment; ionic nature can lead to long-term persistence
Bioaccumulation Potential: Data not comprehensive, but ionic liquids tend to have low to moderate bioaccumulative potential
Mobility in Soil: Water soluble; potential for migration through soil and water
Other Adverse Effects: Avoid uncontrolled release; long-term ecosystem risks unknown
Waste Disposal Methods: Collect and seal in labeled chemical waste containers; hand over to authorized waste disposal contractors; avoid drain disposal
Contaminated Packaging: Rinse containers, then manage as hazardous waste according to local regulations
Disposal Restrictions: Comply with national or region-specific chemical disposal codes
Waste Code: Assign based on local, state, or federal designation for organic chemical waste
UN Number: Not regulated under standard transport regulations (IATA, DOT); specialized packaging required
Transport Hazard Class: Not assigned, but treat as chemical of concern
Packing Group: Not specified; ship in robust, leakproof containers
Environmental Hazards: Not classified, still avoid uncontrolled environmental release
Special Precautions: Inform carriers of chemical nature; emergency contact details affixed to packaging
TSCA Status: Not listed in major chemical inventories; handle as new chemical substance
REACH Registration: May require notification if imported into the EU above threshold amounts
OSHA: Not specifically regulated under hazard communication rules
WHMIS (Canada): Not listed; general chemical precautions apply
Other Regulations: Restrictions may apply based on specific national chemical safety acts
Labeling Requirements: Chemical hazard pictograms, risk/precaution phrases, emergency details
Worker Training: Provide safety data and handling training to all personnel; update procedures with the latest guidelines
