Product Name: Ethyl 6-Iodohexanoate
Chemical Formula: C8H15IO2
CAS Number: 138614-60-1
Recommended Use: Used in organic synthesis, pharmaceutical research, and laboratory settings
Supplier: Reliable chemical suppliers distribute this compound for research and development
Contact Information: Refer to the supplier’s safety or technical support team for emergencies or questions
Classification: Classified as hazardous under GHS standards
Signal Word: Warning
Hazard Statements: Harmful if swallowed; causes skin and eye irritation; may cause respiratory irritation; may be harmful if inhaled
Precautionary Statements: Avoid breathing vapor or mist; wash skin thoroughly after handling; use only in well-ventilated areas; wear protective gloves, clothing, and eye protection
GHS Label Elements: Exclamation mark symbol used to signal moderate acute toxicity and irritation risk
Chemical Name: Ethyl 6-Iodohexanoate
Synonyms: Hexanoic acid, 6-iodo-, ethyl ester
Purity: Greater than 98% (for laboratory-grade material)
CAS Number: 138614-60-1
Impurities: Minor traces of related ester derivatives may be present due to synthesis conditions
Inhalation: Remove person to fresh air; seek medical attention if symptoms persist
Skin Contact: Remove contaminated clothing; rinse skin immediately with plenty of water
Eye Contact: Rinse cautiously with water for several minutes; remove contact lenses if present and easy to do
Ingestion: Rinse mouth thoroughly with water; do not induce vomiting unless instructed by medical personnel
Notes for Medical Staff: Treat symptomatically, monitor for respiratory or allergic reactions
Suitable Extinguishing Media: Use dry chemical, carbon dioxide, or foam; avoid water as the compound may hydrolyze
Specific Hazards: Combustion may create hazardous iodine vapors and carbon oxides; vapors can be irritating
Protective Equipment for Firefighters: Wear self-contained breathing apparatus and full protective gear
Special Procedures: Approach from upwind; move containers away from fire zone if safe; cool containers with water spray if exposed to heat
Personal Precautions: Use appropriate personal protective equipment including gloves and eye protection; ventilate area
Environmental Precautions: Prevent further leakage or spillage if safe; keep chemical from entering drains, surface or groundwater
Methods for Cleanup: Absorb spill with inert materials (sand, earth, vermiculite), place in chemical waste container for disposal
Decontamination: Wash spill site with plenty of soap and water after material pickup
Reporting Requirements: Notify relevant authorities in case of large spill or environmental release
Handling: Avoid contact with skin, eyes, and clothing; use chemical fume hood or local exhaust; do not ingest or inhale; keep away from incompatible substances
Storage: Store in tightly closed containers in a cool, dry, ventilated place; keep away from heat and sources of ignition
Long-Term Stability: Protect from light to prevent degradation; avoid prolonged storage at elevated temperatures
Incompatible Materials: Strong oxidizing agents, strong acids, and bases may react with the compound; avoid storing near food or drink
Engineering Controls: Use local exhaust ventilation or chemical fume hood to minimize exposure
Personal Protection: Wear chemical-resistant gloves (nitrile or neoprene), goggles or face shield, and a lab coat; use respiratory protection if ventilation is insufficient
Workplace Monitoring: Regularly monitor air for possible iodine vapor or compound level; implement standard laboratory hygiene practices
Exposure Limits: No specific occupational exposure limits established, but minimize exposure as much as possible
Appearance: Colorless to pale yellow liquid
Odor: Mild, characteristic organic odor
Melting Point: Not precisely established, expected to be below room temperature
Boiling Point: Approximately 119-125°C at reduced pressure
Solubility: Slightly soluble in water; freely soluble in most organic solvents such as ethanol, acetone, and dichloromethane
Density: Around 1.45 g/cm3
Vapor Pressure: Low at ambient temperature
Flash Point: Estimated above 60°C
Other Properties: Stable under normal laboratory conditions when protected from moisture and light
Chemical Stability: Stable under recommended handling and storage conditions
Conditions to Avoid: Exposure to light, excessive heat, open flames
Incompatible Materials: Strong oxidizers, strong acids, and strong bases
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide, iodine compounds
Polymerization: Product does not undergo hazardous polymerization under normal conditions
Routes of Exposure: Inhalation, skin contact, eye contact, ingestion
Acute Toxicity: Moderate acute toxicity; may cause irritation to digestive tract, respiratory tract, skin, and eyes
Chronic Effects: No data available on chronic toxicity or carcinogenicity; repeated exposure might cause dermatitis or respiratory discomfort
Symptoms of Exposure: Redness, swelling, coughing, nausea, headache
Other Health Effects: Some iodides can affect thyroid function with chronic exposure; use caution if handling regularly
Environmental Precautions: Avoid direct discharge into soil, waterways, or sewers
Aquatic Toxicity: Limited data for this compound, but similar iodo-organic esters can be toxic to aquatic organisms in high concentrations
Persistence and Degradability: Tends to be moderately persistent; full breakdown may require chemical or biological treatment
Bioaccumulation Potential: Possibility of limited bioaccumulation cannot be excluded considering its organic and halogen content
Mobility in Soil: Expected to be relatively immobile due to low solubility in water
Disposal Methods: Dispose of as hazardous chemical waste following local, regional, and national regulations; incineration with proper controls preferred
Contaminated Packaging: Dispose of containers as hazardous waste after triple rinsing and removing chemical residues
Waste Code: Consult with a licensed waste disposal contractor or local waste authorities for correct classification and labeling
Do Not Release: Do not pour unused material down the drain or dispose with household waste
UN Number: Not assigned specifically for Ethyl 6-Iodohexanoate; check for generic organic iodides regulations
Proper Shipping Name: Organic chemical liquid, n.o.s. (not otherwise specified)
Transport Category: May fall into Class 9 (miscellaneous dangerous substances) depending on shipment volume and packaging
Packing Group: III (for moderately hazardous chemicals; confirm with transport guidelines)
Transport Precautions: Ensure containers are sealed, labeled, and secured; avoid temperature extremes, physical shocks, and rough handling
TSCA: Listed in the United States Toxic Substances Control Act inventory
REACH: Subject to pre-registration or registration under the European Union REACH regulations
GHS: Globally Harmonized System labeling and classification required for international trade
Other Regulations: Might require workplace exposure records and chemical inventory reports depending on local rules
Labelling Requirements: Suppliers and users in the lab should follow strict chemical labeling and hazard communication standards
