Product Name: N-Butyl-N-Methyl-Piperidinium Trifluoromethanesulfonate
Chemical Formula: C11H22F3NO3S
Synonyms: 1-butyl-1-methylpiperidinium triflate
Recommended Use: Ionic liquid applications, electrolytes, chemical synthesis
Supplier Details: Manufacturer address, phone, emergency contact number
GHS Classification: Eye irritation, Skin irritation, Acute toxicity (oral, dermal)
Label Elements: Warning, exclamation mark pictogram
Hazard Statements: Causes serious eye irritation, may cause skin irritation, harmful if swallowed
Precautionary Statements: Wash hands thoroughly after handling, use protective gloves and eye protection, avoid contact with skin and eyes
Chemical Name: N-Butyl-N-Methyl-Piperidinium Trifluoromethanesulfonate
CAS Number: 79932-78-0
Concentration: ≥98% by weight
Impurities: Water content, residual solvents (typically <2%)
Inhalation: Move to fresh air, provide oxygen if breathing becomes difficult, seek medical attention if symptoms persist
Skin Contact: Remove contaminated clothing, wash affected area with soap and water, do not use solvents for cleaning, seek medical attention if irritation develops
Eye Contact: Rinse eyes with water for at least 15 minutes, keep eyelids open, consult a physician right away
Ingestion: Rinse mouth thoroughly, drink water, do not induce vomiting, get immediate medical attention
Suitable Extinguishing Media: Dry chemical, foam, carbon dioxide, water spray
Unsuitable Extinguishing Media: Direct water jet
Special Hazards: Combustion may produce toxic or irritating fumes including SOx, NOx, CF3-containing compounds
Protective Equipment: Wear self-contained breathing apparatus, full protective clothing recommended during fire
Firefighting Instructions: Stay upwind, evacuate area, prevent runoff to sewers or waterways
Personal Precautions: Equip suitable protective clothing and gloves, safety goggles, ensure proper ventilation
Spill Response: Absorb with inert material (sand, earth), collect in suitable containers for disposal, prevent entry into drains, wash spill area with soap and water
Environmental Precautions: Avoid discharge to natural waters, notify authorities if contamination occurs
Handling: Avoid inhalation, direct contact with skin, eyes, or clothing; wash thoroughly after handling; avoid eating, drinking, or smoking during use
Storage Conditions: Store in tightly closed container, away from moisture, heat, and direct sunlight; keep in a cool, dry, well-ventilated area
Incompatible Materials: Strong oxidizers, bases, moisture-sensitive materials
Engineering Controls: Use in a chemical fume hood, eye wash and emergency shower recommended in work area
Respiratory Protection: Wear approved respirator if ventilation is inadequate
Skin Protection: Wear chemical resistant gloves (nitrile, neoprene), and lab coat
Eye Protection: Safety goggles or face shield
Hygiene Measures: Wash hands, face, and exposed skin after use, avoid eating or drinking in laboratory
Appearance: Colorless to pale yellow liquid
Odor: Mild, characteristic
Odor Threshold: Not established
pH: Not available
Melting Point / Freezing Point: About -20°C
Boiling Point / Range: >200°C
Flash Point: >150°C (closed cup)
Evaporation Rate: Not determined
Flammability: Not classified as flammable
Vapor Pressure: Very low at room temperature
Solubility in Water: Miscible
Partition Coefficient (n-octanol/water): Not available
Vapor Density: Not determined
Relative Density: 1.3–1.4 g/cm³
Decomposition Temperature: No data
Viscosity: Moderate, ionic liquid characteristics
Chemical Stability: Stable under recommended storage conditions
Reactivity: Stable, but hydrolyzes slowly in humid conditions
Hazardous Reactions: No hazardous polymerization anticipated
Incompatible Materials: Strong oxidizing agents, strong bases
Hazardous Decomposition: Trifluoromethanesulfonic acid, hydrogen fluoride, nitrogen oxides, and sulfur oxides may form in fire or decomposition
Routes of Exposure: Inhalation, skin and eye contact, ingestion
Acute Toxicity: Low toxicity, but can cause irritation on contact
Skin Corrosion/Irritation: May cause redness, discomfort
Eye Damage/Irritation: Causes severe eye irritation
Respiratory Sensitization: Effects not fully studied
Chronic Effects: Prolonged or repeated exposure may cause skin dryness or cracking
Carcinogenicity: Not listed as carcinogen by IARC, NTP, OSHA
Other Data: No mutagenicity, reproductive, or teratogenic effects known for this compound
Ecotoxicity: Not readily biodegradable; aquatic toxicity not fully evaluated
Bioaccumulation: Potential for environmental persistence due to ionic liquid nature
Mobility in Soil: Likely to leach into groundwater if released in large amounts
Persistence and Degradability: May resist biodegradation; chemical hydrolysis slow
Other Adverse Effects: Avoid uncontrolled release to environment
Waste Disposal Methods: Dispose of as hazardous waste in accordance with federal, state, and local environmental regulations; do not discharge into drains or watercourses
Container Disposal: Empty containers may retain residues; triple rinse and manage as hazardous waste
Recycling: Recycling not generally practiced due to contamination risks
UN Number: Not classified as dangerous for transport
Transport Hazard Class: Not regulated under ADR/RID, IMDG, IATA
Packing Group: Not assigned
Special Precautions: Use leakproof containers, ensure upright positioning
DSCL/DSL Inventory: Consult national chemical inventories for current status
OSHA Hazardous Chemicals: Listed according to the US Hazard Communication Standard 29 CFR 1910.1200
SARA Title III Sections 311/312: Acute health hazard
REACH Status: Pre-registered substance in the EU
Other Regulations: Ensure compliance with workplace regulations and environmental laws in each relevant jurisdiction
