MSDS for N-Decylimidazolium Trifluoroacetate

Identification

Product Name: N-Decylimidazolium Trifluoroacetate
Chemical Formula: C15H27F3N2O2
CAS Number: 859239-62-8
Supplier: Manufacturer or distributor details as per label or invoice
Synonyms: 1-Decyl-3-methylimidazolium Trifluoroacetate, Ionic Liquid
Recommended Use: Laboratory reagent, research chemical
Emergency Contact: Refer to company emergency phone number

Hazard Identification

GHS Classification: Skin irritation (Category 2), Eye irritation (Category 2A), Acute toxicity oral (Category 4)
Pictograms: Exclamation mark
Signal Word: Warning
Hazard Statements: Causes skin and eye irritation, may be harmful if swallowed, may cause respiratory irritation
Precautionary Statements: Avoid breathing dust, wash skin thoroughly after handling, wear protective gloves and eye protection, do not eat or drink during use
Potential Health Effects: Inhalation may produce respiratory tract irritation, ingestion could cause nausea or stomach upset, skin contact may result in redness or rash, eye contact may cause pain or irritation

Composition / Information on Ingredients

Chemical Name: N-Decylimidazolium Trifluoroacetate
Common Name: Ionic liquid
Concentration: >98%
Impurities: Less than 2% unidentified or proprietary impurities
Molecular Weight: 324.39 g/mol
EC Number: Not available
Specific Chemical Identity: Not mixed with other substances under normal formulation

First Aid Measures

Inhalation: Move person to fresh air, offer oxygen if breathing becomes difficult, seek medical attention if symptoms persist
Skin Contact: Remove contaminated clothes, rinse affected skin with water and soap for several minutes, see a doctor if irritation develops
Eye Contact: Flush eyes gently with water for at least fifteen minutes while holding eyelids apart, remove contact lenses if present, seek immediate medical help
Ingestion: Rinse mouth with water, do not induce vomiting, seek prompt medical assistance, monitor for symptoms such as stomach upset or dizziness
Acute Symptoms: Redness, blistering, tearing, coughing, nausea

Fire-Fighting Measures

Suitable Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide
Unsuitable Media: Avoid direct water stream which may spread fire
Specific Hazards: Thermal decomposition may release toxic vapors such as nitrogen oxides, trifluoroacetic acid, hydrogen fluoride, and carbon monoxide
Protective Equipment: Firefighters should wear self-contained breathing apparatus and full turn-out gear
Special Procedures: Isolate area, keep unnecessary people away, cool exposed containers with water spray to prevent pressure build-up
Explosion Hazards: Not expected to be explosive under normal handling

Accidental Release Measures

Personal Precautions: Use chemical-resistant gloves, eye protection, and dust mask or respirator if powder
Environmental Precautions: Prevent product from entering drains, waterways, or soil
Cleanup Methods: Absorb spill with sand or inert absorbent, place residue in a chemical waste container, ventilate the area, clean up residue with plenty of water
Disposal: Contain and collect spillage, avoid creating dust or splashes, dispose of waste material following local regulations

Handling and Storage

Safe Handling: Work in well-ventilated area, avoid skin and eye contact, avoid inhalation of vapors or dust, do not eat or drink while handling
Hygiene Practices: Wash hands and face thoroughly after handling, remove contaminated clothing and wash before reuse
Storage Conditions: Store in tightly closed container, keep in cool, dry, and well-ventilated place, protect from moisture, direct sunlight, and incompatible substances
Incompatibilities: Store away from oxidizers, acids, and bases
Storage Temperature: Recommended storage between 2°C and 8°C

Exposure Controls and Personal Protection

Permissible Exposure Limits: No occupational exposure limits established for this compound
Engineering Controls: Work in fume hood or use local exhaust ventilation
Personal Protective Equipment: Safety glasses with side-shields, protective gloves made from chemical-resistant material, lab coat or apron
Respiratory Protection: Use NIOSH-certified respirators if airborne concentrations are high
Environmental Measures: Prevent environmental release by using containment procedures

Physical and Chemical Properties

Appearance: Clear to pale yellow viscous liquid
Odor: Mild, not distinct
Melting Point: Below ambient temperature
Boiling Point: Decomposes before boiling at atmospheric pressure
Flash Point: >100°C
Solubility: Miscible with water and polar organic solvents
Vapor Pressure: Very low at room temperature
pH: Neutral to slightly acidic
Partition Coefficient: Not determined
Density: Approximately 1.1 g/cm³

Stability and Reactivity

Chemical Stability: Stable under normal handling and storage conditions
Decomposition Products: May emit toxic fumes including hydrogen fluoride, nitrogen oxides, and trifluoroacetic acid during high-temperature decomposition
Reactivity: Not highly reactive, but may hydrolyze slowly in presence of moisture
Incompatible Materials: Strong oxidizing agents, strong bases, strong acids
Hazardous Polymerization: Will not occur
Conditions to Avoid: Excess heat, sparks, flames, moisture, direct sunlight

Toxicological Information

Acute Toxicity: Limited data available, estimated oral LD50 (rat) >200 mg/kg
Chronic Toxicity: No long-term studies available
Routes of Exposure: Inhalation, ingestion, skin and eye contact
Possible Effects: Mucous membrane irritation, skin or eye burns, coughing, nausea, dizziness
Carcinogenicity: Not listed by IARC, NTP, or OSHA
Mutagenicity: No reliable data
Reproductive Toxicity: No reliable studies known

Ecological Information

Ecotoxicity: No thorough testing, precaution advised for aquatic organisms and terrestrial animals
Persistence: May persist in environment due to low volatility
Bioaccumulation: Bioaccumulation potential not known
Degradability: Not rapidly biodegradable under standard conditions
Mobility: Moderate water solubility may allow movement through soil
Aquatic Toxicity: Prevent release into waterways to protect aquatic ecosystems
Other Adverse Effects: Information limited, avoid release to environment

Disposal Considerations

Waste Handling: Collect chemical residues in approved containers, label clearly for hazardous waste pickup
Disposal Methods: Dispose materials in accordance with local, regional, and national regulations, incineration preferred for bulk waste
Packaging Disposal: Wash empty containers thoroughly before recycling or discard as hazardous waste
Avoid: Disposing through drains or normal municipal waste channels
Consult: Local licensed hazardous waste disposal facility for further guidance

Transport Information

UN Number: Not classified for transport by land, sea, or air under common regulations
Proper Shipping Name: Not assigned
Transport Hazard Class: Not regulated
Packing Group: Not applicable
Special Precautions: Secure containers tightly, label clearly, prevent physical damage or leaks
Shipping Description: Handle as hazardous chemical in laboratory quantities; verify country-specific classification for larger shipments

Regulatory Information

TSCA Status: Not listed by the Toxic Substances Control Act
REACH Status: Not registered
SARA Title III: Not subject to Section 313
California Proposition 65: Not listed
OSHA Hazard Categories: Irritant
Other: Ensure safety data sheet and labeling conform with workplace hazard communication standards
Local Regulations: Confirm compliance with local occupational, safety, and environmental guidelines for handling new or imported compounds