Product Name: N-Propylsulfonate Pyridinium Trifluoromethanesulfonate
Chemical Family: Ionic liquid / Organosulfonate compound
Synonyms: 1-(3-Sulfonatopropyl)pyridinium triflate
Recommended Use: Laboratory chemical, electrolyte, specialty solvent
Supplier Details: Manufacturer information with contact for emergencies
Emergency Phone: Dedicated phone line for chemical emergencies or spills
Classification: Eye irritation (Category 2), Skin irritation (Category 2), Acute toxicity (Oral, Category 4)
Signal Word: Warning
Hazard Statements: Causes skin and eye irritation, Harmful if swallowed
Pictograms: Exclamation mark for irritation and toxicity
Precautionary Statements: Avoid breathing dust or vapors, Use gloves and eye protection, Wash skin thoroughly after use
Other Hazards: No known environmental persistence or bioaccumulation, but limited toxicological data available
Chemical Name: N-Propylsulfonate Pyridinium Trifluoromethanesulfonate
CAS Number: 1346789-45-7 (example for illustration; confirm actual CAS)
EC Number: 620-456-4 (for illustration)
Concentration: Pure compound, contains no significant impurities
Relevant Impurities: None expected above regulatory thresholds for hazardous substances
General Notes: Seek medical attention if any unusual symptoms develop or persist
Inhalation: Move victim to fresh air, keep at rest, consult medical personnel if symptoms develop
Skin Contact: Remove contaminated clothing, wash skin with plenty of soap and water for at least 15 minutes, seek advice if irritation persists
Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. Immediate medical attention is highly recommended
Ingestion: Rinse mouth, do not induce vomiting, seek immediate medical attention
Suitable Extinguishing Media: Water spray, carbon dioxide, dry chemical powder, alcohol-resistant foam
Specific Hazards: May release hazardous fumes such as sulfur oxides, hydrogen fluoride, nitrogen oxides, and toxic organics in case of fire
Advice for Firefighters: Use protective equipment and self-contained breathing apparatus
Special Protective Actions: Move containers from fire area if safe to do so, avoid contact with decomposition products
Explosion Data: Not known to present explosion hazard, but dust in air can ignite under strong ignition sources
Personal Precautions: Use personal protective equipment including gloves, goggles, and protective clothing
Environmental Precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains
Methods for Clean-up: Contain spillage, collect with inert absorbent material (such as sand or vermiculite), transfer to an appropriate waste container for disposal
Decontamination: Clean contaminated surface thoroughly with water and a mild detergent
Precautions for Safe Handling: Avoid direct contact with skin and eyes, prevent inhalation of dust or vapors, use with adequate ventilation
Hygiene Measures: Wash hands and face after handling chemicals, avoid eating, drinking, or smoking when handling the substance
Safe Storage: Store in tightly closed, clearly labeled containers in a cool, dry, well-ventilated area, away from incompatible substances such as strong bases or oxidizers
Conditions to Avoid: Exposure to moisture, high temperatures, direct sunlight
Control Parameters: No occupational exposure limits established by OSHA, ACGIH, or NIOSH
Engineering Controls: Use fume hood or local exhaust ventilation in laboratory settings
Personal Protective Equipment: Chemical-resistant gloves (nitrile or neoprene), safety goggles with side shields, lab coat or protective clothing
Respiratory Protection: Use a particulate filter respirator if dust or aerosols may be generated
Environmental Controls: Minimize environmental discharge as a precaution
Appearance: White to off-white powder or crystalline solid
Odor: Faint, characteristic
pH: Not available
Melting Point: 145-150°C
Boiling Point: Decomposes before boiling at atmospheric pressure
Solubility: Miscible with water, soluble in most polar organic solvents
Vapor Pressure: Not significant at room temperature
Relative Density: Approximately 1.6 (water = 1)
Partition coefficient (n-octanol/water): Not determined
Other Properties: Non-volatile, hygroscopic, forms stable ionic solution in water
Chemical Stability: Remains stable under standard temperature and pressures if kept dry
Reactive Substances: Strong bases, strong oxidizing agents
Hazardous Decomposition Products: Sulfur dioxide, hydrogen fluoride, carbonyl compounds, nitrogen oxides under fire or high-temperature decomposition
Conditions to Avoid: Heat, direct sunlight, moisture, strong acids or alkalis
Acute Toxicity: May cause irritation or discomfort if inhaled, ingested, or in contact with skin
Chronic Toxicity: No data available for cumulative or chronic effects
Route of Exposure: Inhalation, skin and eye contact, ingestion
Symptoms: Local irritation, coughing, itching, redness, pain
Carcinogenicity: No evidence of carcinogenic effects reported
Mutagenicity: No evidence of mutagenic effects observed
Other Target Organ Effects: Lack of comprehensive studies; use precautionary measures
Environmental Fate: Not considered persistent or bioaccumulative based on available information
Aquatic Toxicity: No data available for specific aquatic toxicity; similar compounds may impact aquatic organisms at high concentrations
Mobility in Soil: Expected to be mobile in water, may seep into groundwater if not contained
PBT/vPvB assessment: Not identified as a persistent, bioaccumulative, or toxic substance
Other Adverse Effects: Limited ecotoxicological data; prevent uncontrolled release to the environment
Product Disposal: Dispose of unwanted chemicals as hazardous waste in accordance with local, regional, and national regulations
Contaminated Packaging: Triple rinse containers, dispose as hazardous waste or through appropriate licensed facility
Special Precautions: Do not allow to enter sewer, surface or ground water
Waste Codes: Classified under waste codes for organic laboratory chemicals (depending on jurisdiction)
UN Number: Not regulated for transport (confirm with latest ADR/IATA/IMDG updates)
UN Proper Shipping Name: Not classified as a dangerous good
Transport Hazard Class: None
Packing Group: None
Marine Pollutant: Not expected to be a marine pollutant
Special Precautions: Protect packages from physical damage, moisture, and high temperature during transit
US Regulations: Not listed on any major hazardous substance lists such as SARA, CERCLA, or TSCA; check state-specific regulations
Canada: Not assigned WHMIS classification; laboratory use only
EU Regulatory Status: Not listed under REACH as a Substance of Very High Concern, verify with latest ECHA database
Labeling Requirements: Hazard pictograms and safety phrases according to GHS
Other Global Inventories: Appears on or exempt from major chemical inventories (pending final confirmation)
